Sewing Machine Repair Shop Near me in Madipakkam - VS Sewing Machine
The hooks are the most common issue concerning sewing machine’s timing. The second most common issue is related to the needle. The first step is to check the sewing machine’s timing to make sure that there is a problem.
VS Sewing Machine, Sewing Machine showroom in Chennai offers you with the Top selling brands along with all its Sewing Machines models in the Industry. You can get the recommendations over here with the industry experts. Also we serves you best Pre-Selling as well as the Post Selling Services.
- If the hook is turning clockwise, the needle must be moved to the far right.
- If the hook is turning counter-clockwise, the needle must be moved to the far left.
- The next step is to look at the tip of the hook as it rotates. Is
the hook passing through or underneath the eye of the needle? If it is
going underneath the eye then the timing is considered “off.” If the
hook is passing above the eye this could be indicative of a timing issue
also. Sewing Machine Repair Service Center in Madipakkam
This is one of the common sewing machine problems that sewist faces every once in a while. Once you know that you need to make an adjustment, make sure that your sewing machine is set to straight stitch. Remove the machine’s base cover if you haven’t yet done so. You’d also have the following tools:
- Small flathead screwdriver
- Flashlight or lamp
- Ruler or Tape Measure
- Sewing Machine Oil
- Marker Sewing Machine Repair Service Center in Mylapore
The height of the needle bar will most likely need to be adjusted. Most sewing machines have marks to help you easily set the height of the needle bar. To loosen the needle bar, you will need to consult your user’s manual. Once it is loosened, adjust the height to alight with the top timing mark even with the lowest point on the timing bar bushing.
VS Sewing Machine
Madipakkam Address
Perambur Address
Mylapore Address
No comments:
Post a Comment