Juki Sewing Machine Repair Service Center in Chennai - VS Sewing Machine

 Juki Sewing Machine Repair Service Center in Chennai - VS Sewing Machine

Sewing Machines are arranged dependent on their usefulness, and they have likewise been ordered relying upon their highlights like sewing, knitting and weaving.

Check the sewing machine’s throat plate opening for needle strikes or small rough nicks. If you have been breaking needles lately, there may be small burrs on the throat plate. Thread can get caught on these rough areas which leads to thread breaks or uneven stitching. A sewing machine technician can usually file these rough spots out. 

These ten troubleshooting suggestions usually can fix the common sewing machine problems. Beyond these simple fixes it might be time to call a professional. Sewing machine service technicians are trained to spot common problems. They see sick machines every day.

 

Sewing machines need weekly if not daily removable of lint and fluff from underneath the throat plate. First, remove the throat plate and bobbin case to expose areas that lint gathers. Using a brush or a Q-tip, remove all visible lint and dust bunnies. If the machine requires oil, add a drop of oil after cleaning. Do not use canned air. 

Cut out your thread and the first thing you should do is to check for the grain in your strand of thread. This will make your threading easier – a lot. Most often the cut end will be with the grain, but it is better to check for a good sewing experience. The on grain thread will pass through the needle faster and through the fabric even better.

If you have a very soft touch you maybe able to tell by just holding the strand between your fingers – like you can tell the direction of the nap of fleece by stroking it. The thread will feel smoother on the straight grain. 

 

 

 

 

HSW Sewing Machine Repair Service Center in Chennai - VS Sewing Machine

 HSW Sewing Machine Repair Service Center in Chennai - VS Sewing Machine

Cut out your thread and the first thing you should do is to check for the grain in your strand of thread. This will make your threading easier – a lot. Most often the cut end will be with the grain, but it is better to check for a good sewing experience. The on grain thread will pass through the needle faster and through the fabric even better.

If you have a very soft touch you maybe able to tell by just holding the strand between your fingers – like you can tell the direction of the nap of fleece by stroking it. The thread will feel smoother on the straight grain.

Hold the thread with a tweezer as you take it to the needle eye. You can have a little better control.

 

Sewing Machines are arranged dependent on their usefulness, and they have likewise been ordered relying upon their highlights like sewing, knitting and weaving.

• First and foremost change the needle to a new one and see. Ensure it is appropriate for the fabric and thread you are using. Insert it so that the flat side is to the back (depending on your machine) and it is pushed all the way up. You can read more on selecting sewing machine needles here.
• Ensure that you are using top quality thread and that it has no tangles. Learn more about selecting sewing machine thread here. 
• Rethread the machine through all the slots (after taking out the whole top thread out).
• Is the tension well adjusted? Badly made stitches, fabric getting sucked inside, etc. are mostly due to badly adjusted tension. Check out how to adjust it properly in this post on sewing machine tension adjustment.  
•   Checkout the post on the different types of hand embroidery thread available – 12 types, with additional tips on how to use them properly. Checkout the post here about the right way to select sewing machine thread.
• 
  
• VS Sewing Machine
  
  Madipakkam Location
  
  Perambur Location
  
  Mylapore Location
  
  
  

MultiNeedle Sewing Machine Repair Service Center in Chennai - VS Sewing Machine

 MultiNeedle Sewing Machine Repair Service Center in Chennai - VS Sewing Machine

Sewing Machines are arranged dependent on their usefulness, and they have likewise been ordered relying upon their highlights like sewing, knitting and weaving. 

The bobbin too has its own tension. If the bobbin thread is not in the its tension, the stitch will look unbalanced. Be sure the bobbin thread “clicks” into bobbin tension. 

sewing machines need regular tune-ups. Having a local sewing machine center professionally clean your sewing machine will help with many troublesome issues. Sewing machine technicians know how to keep all those moving parts perfectly aligned for precision stitching. If you want your sewing machine to last, have it serviced on an annual basis. 

Checkout the post on the different types of hand embroidery thread available – 12 types, with additional tips on how to use them properly. Checkout the post here about the right way to select sewing machine thread.

Coat the thread with beeswax for adding strength to the strands and to avoid the inevitable tangling of threads.

For hand sewing,  I usually use a thread meant for sewing machine, unless it is a buttonhole. Find a darker colour than the fabric if you cannot get an exact match.

There is no thread more difficult to thread than a Perle cotton – because of the twist in the thread it is the most difficult thread that I use – the thread is beautiful when used for embroidering but a pain to thread on to a needle.

 Sounds simple but not getting the needle all the way up into position will make stitches not form correctly. This problem is often hard to spot. Loosen the needle screw and gently lift the needle up. Another way to check is by using the built-in needle threader. If the needle threader does not line up with the needle’s eye, the needle is not high enough.

VS Sewing Machine

Madipakkam Location

Perambur Location

Mylapore Location