Juki Sewing Machine Repair Service Center in Chennai - VS Sewing Machine
Sewing Machines are arranged dependent on their usefulness, and they
have likewise been ordered relying upon their highlights like sewing,
knitting and weaving.
Check the sewing machine’s throat plate opening for needle strikes or small rough nicks. If you have been breaking needles lately, there may be small burrs on the throat plate. Thread can get caught on these rough areas which leads to thread breaks or uneven stitching. A sewing machine technician can usually file these rough spots out.
These ten troubleshooting suggestions usually can fix the common sewing machine problems. Beyond these simple fixes it might be time to call a professional. Sewing machine service technicians are trained to spot common problems. They see sick machines every day.
Sewing machines need weekly if not daily removable of lint and fluff from underneath the throat plate. First, remove the throat plate and bobbin case to expose areas that lint gathers. Using a brush or a Q-tip, remove all visible lint and dust bunnies. If the machine requires oil, add a drop of oil after cleaning. Do not use canned air.
Cut out your thread and the first thing you should do is to check for the grain in your strand of thread. This will make your threading easier – a lot. Most often the cut end will be with the grain, but it is better to check for a good sewing experience. The on grain thread will pass through the needle faster and through the fabric even better.
If you have a very soft touch you maybe able to tell by just holding the strand between your fingers – like you can tell the direction of the nap of fleece by stroking it. The thread will feel smoother on the straight grain.
No comments:
Post a Comment