Thursday, September 30, 2021

HSW Sewing Machine Repair Service Center in Chennai - VS Sewing Machine

 HSW Sewing Machine Repair Service Center in Chennai - VS Sewing Machine

Cut out your thread and the first thing you should do is to check for the grain in your strand of thread. This will make your threading easier – a lot. Most often the cut end will be with the grain, but it is better to check for a good sewing experience. The on grain thread will pass through the needle faster and through the fabric even better.

If you have a very soft touch you maybe able to tell by just holding the strand between your fingers – like you can tell the direction of the nap of fleece by stroking it. The thread will feel smoother on the straight grain.

Hold the thread with a tweezer as you take it to the needle eye. You can have a little better control.


 


Sewing Machines are arranged dependent on their usefulness, and they have likewise been ordered relying upon their highlights like sewing, knitting and weaving.

  • First and foremost change the needle to a new one and see. Ensure it is appropriate for the fabric and thread you are using. Insert it so that the flat side is to the back (depending on your machine) and it is pushed all the way up. You can read more on selecting sewing machine needles here.
  • Ensure that you are using top quality thread and that it has no tangles. Learn more about selecting sewing machine thread here. 
  • Rethread the machine through all the slots (after taking out the whole top thread out).
  • Is the tension well adjusted? Badly made stitches, fabric getting sucked inside, etc. are mostly due to badly adjusted tension. Check out how to adjust it properly in this post on sewing machine tension adjustment.  
  •   Checkout the post on the different types of hand embroidery thread available – 12 types, with additional tips on how to use them properly. Checkout the post here about the right way to select sewing machine thread.

  • VS Sewing Machine

    Madipakkam Location

    Perambur Location

    Mylapore Location


No comments:

Post a Comment